Red Rodgers  

Вернуться   Red Rodgers > Запасная полоса > S.C.S. Dangerous Waters

Ответ
 
Опции темы Опции просмотра
Старый 08-03-2010, 14:58   #581
Jaf
БЧ-2
 
Аватар для Jaf
 
Регистрация: Nov 2008
Сообщений: 255
Цитата:
Сообщение от Lau Посмотреть сообщение
classification filter in sonar station can classify enemy platform before even showing noise lines in sphere station screen
If you do not see the lines - it does not mean that they do not exist :)
To see the faint lines you must configure the gamma for the monitor.
Set .Gamma "0.6" in dangerouswaters.ini in section [Graphics] and you will see weak lines.
(This setting applied for fullscreen mode)

Цитата:
Сообщение от Castout Посмотреть сообщение
:52:What a year of further waiting? I certainly hope it won't need that long .
Any idea how long is needed to fix the sound bug? Any estimate?
I think that this week I'll do it, if I'll get free time ;)

Цитата:
Сообщение от whiskey111 Посмотреть сообщение
2. AI helicopter controlled by player is losing it's ability to hover after droping torpedo. It means that after helicopter attack it is useless for any ASW purposes.
For normal work of AI helicopter controlled by player is needed to set it operation mode after launch.
Do you set helo`s work mode as it write in RA_Weapon_Info_rev2.pdf page44 and next?

Цитата:
Сообщение от whiskey111 Посмотреть сообщение
3. Is this possible in the future to fix the bug of wake-homing torpedos (the don't lock on human controlled surface ships now) ?
This is very complicated bug.
The work continues, but the end is not clear yet...

Последний раз редактировалось Jaf; 08-03-2010 в 15:34.
Jaf вне форума   Ответить с цитированием
Старый 08-03-2010, 16:03   #582
goldorak
Sergeant
 
Регистрация: Dec 2008
Сообщений: 250
@ Lau : as Jaf said calibration of monitor is fundamental to see the really faint traces on sonar. My advice is that you download the Timmgy G00 manual from the subguru website. Inside the folder you'll find the manual and an image that will help you calibrate the gamma correctly for DW (it was used for Sub Command but works also in DW).
goldorak вне форума   Ответить с цитированием
Старый 08-03-2010, 19:36   #583
whiskey111
Corporal
 
Аватар для whiskey111
 
Регистрация: Jan 2010
Сообщений: 85
-Jaf-
I have launched heli in default mode (active-passive). I can't find anythind about my issue in manual.
whiskey111 вне форума   Ответить с цитированием
Старый 08-03-2010, 20:30   #584
fitzcarraldo
DW Sub Captain
 
Аватар для fitzcarraldo
 
Регистрация: Sep 2009
Сообщений: 41
Цитата:
Сообщение от goldorak Посмотреть сообщение
@ Lau : as Jaf said calibration of monitor is fundamental to see the really faint traces on sonar. My advice is that you download the Timmgy G00 manual from the subguru website. Inside the folder you'll find the manual and an image that will help you calibrate the gamma correctly for DW (it was used for Sub Command but works also in DW).
Where is that Timmgy G00 manual? I´d browse the Subguru site (DW and SC), but I didn´t view it.

Many thanks and regards.

Fitzcarraldo
fitzcarraldo вне форума   Ответить с цитированием
Старый 08-03-2010, 20:48   #585
CrazyIvan
Bugcatcher
 
Аватар для CrazyIvan
 
Регистрация: Nov 2008
Адрес: Russia Kursk City
Сообщений: 1,017
http://www.subguru.com/missions/SCHQ_TACMAN_PDF.zip
CrazyIvan вне форума   Ответить с цитированием
Старый 08-03-2010, 22:56   #586
Lau
Senior Aircraftsman
 
Аватар для Lau
 
Регистрация: Feb 2010
Сообщений: 53
Hi,

Thank you for quick reply.

I did setup my monitor as advised.

1) Is it normal that Amethyste does not detect 688i FLT III running at flank on sphere over 4 NM? For info Amethyste is moving slow at 2 kts.

2) Can you give me the exact meaning of info for following sensor description in USNI for Amethyste sphere : "16 kts max detectable spd; SNR -10"??

3) Can not recall the new bundary for Torp TIW, I get TIW from 10 NM, is it normal, I thought it was reduced to something like 3 NM...?


Thanks,

Lau

Последний раз редактировалось Lau; 08-03-2010 в 23:52.
Lau вне форума   Ответить с цитированием
Старый 09-03-2010, 00:37   #587
Castout
Senior Aircraftsman
 
Регистрация: Nov 2008
Сообщений: 43
Цитата:
Сообщение от Jaf Посмотреть сообщение


I think that this week I'll do it, if I'll get free time


Castout вне форума   Ответить с цитированием
Старый 09-03-2010, 01:00   #588
Jaf
БЧ-2
 
Аватар для Jaf
 
Регистрация: Nov 2008
Сообщений: 255
Цитата:
Сообщение от Lau Посмотреть сообщение
1) Is it normal that Amethyste does not detect 688i FLT III running at flank on sphere over 4 NM? For info Amethyste is moving slow at 2 kts.
Check 688i is under/over layer.

Цитата:
Сообщение от Lau Посмотреть сообщение
3) Can not recall the new bundary for Torp TIW, I get TIW from 10 NM, is it normal, I thought it was reduced to something like 3 NM...?
Send test mission, please.
Jaf вне форума   Ответить с цитированием
Старый 09-03-2010, 02:29   #589
fitzcarraldo
DW Sub Captain
 
Аватар для fitzcarraldo
 
Регистрация: Sep 2009
Сообщений: 41
Цитата:
Сообщение от CrazyIvan Посмотреть сообщение
many thanks!!!

Fitzcarraldo
fitzcarraldo вне форума   Ответить с цитированием
Старый 09-03-2010, 14:41   #590
Jaf
БЧ-2
 
Аватар для Jaf
 
Регистрация: Nov 2008
Сообщений: 255
Цитата:
Сообщение от Castout Посмотреть сообщение
:)
Even no need to edit the code :)
Mr. CrazyIvan killed two birds: he inserted into RA the corrected sound pack.
Waiting...

Последний раз редактировалось Jaf; 09-03-2010 в 15:23.
Jaf вне форума   Ответить с цитированием
Старый 09-03-2010, 15:36   #591
Lau
Senior Aircraftsman
 
Аватар для Lau
 
Регистрация: Feb 2010
Сообщений: 53
Hi Jaf,

Thank you for answer question 1 and 3

1) 688i FLT III not protected by layer in test mission, so you thing it is a bug?

2) Please reply to my question 2 previous message - if not clear let me know

3) Test mission attached for TIW bug

4) Amethyste periscope depth not realistic, can you correct to 66ft

RA v1.1 simulated periscope mesures 12 ft, should be 21ft as you can see in picture attached.

New periscope depth for Amethyste should 53ft + 13ft = 66ft

Thanks,

Lau
Миниатюры
Нажмите на изображение для увеличения
Название: le-rubis.jpg
Просмотров: 746
Размер:	89.1 Кб
ID:	8417  
Вложения
Тип файла: zip tiwbug.zip (665 байт, 508 просмотров)

Последний раз редактировалось Lau; 09-03-2010 в 15:57.
Lau вне форума   Ответить с цитированием
Старый 09-03-2010, 16:01   #592
LUKNER
Sergeant
 
Аватар для LUKNER
 
Регистрация: Mar 2010
Сообщений: 249
How to make a sliding device to maintain a speed of 8-10 knots under water and not break?
__________________
Глупцов тупые языки
Как мины в океане,
Не знаешь где коснешься их рогов,
А где лишь просто - бортом по минрепу!
LUKNER вне форума   Ответить с цитированием
Старый 09-03-2010, 16:51   #593
Jaf
БЧ-2
 
Аватар для Jaf
 
Регистрация: Nov 2008
Сообщений: 255
Цитата:
Сообщение от Lau Посмотреть сообщение
1) 688i FLT III not protected by layer in test mission, so you thing it is a bug?
In my attached mission autocrew detect 688i on 6,4nm (after ~5min)

Цитата:
Сообщение от Lau Посмотреть сообщение
2) Please reply to my question 2 previous message - if not clear let me know
All questions about database values - to Mr. CrazyIvan.
He is MasterOfDatabase.

Цитата:
Сообщение от Lau Посмотреть сообщение
3) Test mission attached for TIW bug
I do not see "TIW bug" in tiwbug.zip mission.
Can anyone else confirm the bug in this mission?

Цитата:
Сообщение от Lau Посмотреть сообщение
4) Amethyste periscope depth not realistic, can you correct to 66ft. RA v1.1 simulated periscope mesures 12 ft, should be 21ft as you can see in picture attached. New periscope depth for Amethyste should 53ft + 13ft = 66ft
Are you sure that just this mast on your picture is a periscope?
Миниатюры
Нажмите на изображение для увеличения
Название: Masts.jpg
Просмотров: 760
Размер:	44.2 Кб
ID:	8419   Нажмите на изображение для увеличения
Название: Schema.jpg
Просмотров: 614
Размер:	87.8 Кб
ID:	8420  
Вложения
Тип файла: rar 0 TEST SPHERE.rar (537 байт, 491 просмотров)
Jaf вне форума   Ответить с цитированием
Старый 09-03-2010, 17:54   #594
goldorak
Sergeant
 
Регистрация: Dec 2008
Сообщений: 250
Yeah, the first mast is the radar, the second is the periscope, the third and fourth maybe esm and snorkel and the last radio antenna ?
One thing is sure, the last mast is not the periscope.
goldorak вне форума   Ответить с цитированием
Старый 09-03-2010, 18:14   #595
LUKNER
Sergeant
 
Аватар для LUKNER
 
Регистрация: Mar 2010
Сообщений: 249
I think the left is a raised periscope in the conning tower.
__________________
Глупцов тупые языки
Как мины в океане,
Не знаешь где коснешься их рогов,
А где лишь просто - бортом по минрепу!
LUKNER вне форума   Ответить с цитированием
Старый 09-03-2010, 18:32   #596
goldorak
Sergeant
 
Регистрация: Dec 2008
Сообщений: 250
Maybe the Rubis has 2 pericopes, an attack periscope and a bigger one for surveillance.
The attack periscope would be just behind the radar mast, and the bigger would be the last mast.
I really have no idea if modern subs have more than one periscope.
goldorak вне форума   Ответить с цитированием
Старый 09-03-2010, 18:46   #597
CrazyIvan
Bugcatcher
 
Аватар для CrazyIvan
 
Регистрация: Nov 2008
Адрес: Russia Kursk City
Сообщений: 1,017
Цитата:
Сообщение от Lau Посмотреть сообщение
Hi Jaf,

Thank you for answer question 1 and 3

1) 688i FLT III not protected by layer in test mission, so you thing it is a bug?

2) Please reply to my question 2 previous message - if not clear let me know

3) Test mission attached for TIW bug

4) Amethyste periscope depth not realistic, can you correct to 66ft

RA v1.1 simulated periscope mesures 12 ft, should be 21ft as you can see in picture attached.

New periscope depth for Amethyste should 53ft + 13ft = 66ft

Thanks,

Lau
Your primary means of detection - LF Towed Array.
MF Spherical (800-2000 Hz) - mainly for the classification purposes. The high frequencies poorly travel in water.

12 meters - but not feet.
CrazyIvan вне форума   Ответить с цитированием
Старый 09-03-2010, 19:09   #598
goldorak
Sergeant
 
Регистрация: Dec 2008
Сообщений: 250
Цитата:
Сообщение от Jaf Посмотреть сообщение
Even no need to edit the code
Mr. CrazyIvan killed two birds: he inserted into RA the corrected sound pack.
Waiting...

You mean the sound bug is already fixed ?
Waiting anxiously to re-download the mod.
goldorak вне форума   Ответить с цитированием
Старый 09-03-2010, 19:44   #599
Jaf
БЧ-2
 
Аватар для Jaf
 
Регистрация: Nov 2008
Сообщений: 255
Цитата:
Сообщение от goldorak Посмотреть сообщение
You mean the sound bug is already fixed?
Rather - yes, than no :)
Some time to test needed...
Jaf вне форума   Ответить с цитированием
Старый 09-03-2010, 22:52   #600
Lau
Senior Aircraftsman
 
Аватар для Lau
 
Регистрация: Feb 2010
Сообщений: 53
Here follow in order my observations :

Question 1 - Is it normal that Amethyste does not detect 688i FLT III running at flank on sphere over 4 NM?


6,4NM with autocrew sounds logical, I do not use autocrew, so it is normal I detected 688i at 4NM only on sphere.
Use outocrew is cheating anyway But I like it makes the game harder = more interesting!



Question 4 - Amethyste periscope depth not realistic, can you correct to 66ft? (pls correction 62ft read below)

info from : http://www.defense.gouv.fr/marine/de...na_perle_s_606

Says last line that there are two periscopes in "La Perle", attack and survelliance bigger one!

Équipements électroniques
1 radar 1007
1 radar Racal Decca
1 sonar multifonction DMUX-20
1 sonar remorqué ETBF DSUV-62 C
1 sonar DUUG-7
Contre-mesure : 1 détecteur ARUR-13
1 système de direction de combat TITAC (+ liaison 11)
Système d(aide au commandement SEAO/OPSMER
Système de transmission par satellite Syracuse
Système de navigation intégré avec 2 centrales inertielles Minicim de SAGEM
Périscope de veille SPS et (and) périscope d'attaque APS STS

Math for my calculation according to picture and 3D view modeled in RA v1.1

1) Place Amethyste at surface sea state 1 and raise periscope
2) Dive and mark depth when water at bottom of conning tower
3) Mark again when water at top of conning tower and start of periscope
4) Mark when water at top of periscope


2-Depth when water at bottom of conning tower = 28ft
3-Depth when water at top of conning tower and start of periscope = 44ft
4-Depth when water at top of periscope = 56ft

Conning tower hight = 44ft - 28ft = 16ft according to RA v1.1 model
Periscope hight = 56ft - 44ft = 12ft according to RA v1.1 model

You can see now how I found 12ft hight for current Amethyste attack periscope

Now taking picture I extrapolate hight of survelliance periscope compare to hight of conning tower.
You will see that survelliance periscope is a bit higher than conning tower. Keeping proportions modeled in 3D view of v1.1,

- I mesure conning tower in picture and find 5 cm
- I mesure survelliance periscope in picture and find 6.5 cm

I know size in ft of conning tower modeled in 3D view in v1.1 = 16ft

By interpolating I find that survelliance periscope should mesure something around 21ft

- I know size of current attack periscope in 3D view is = 12ft
- I know depth when water at top of attack periscope = 56ft (with current periscope 12ft)
- I find difference of hight between existing attack periscope and real survelliance periscope = 21ft - 12ft = +9ft
- I know Periscope Depth for Amethyste - USNI info v1.1 is around = 53ft

Therefore new depth when water at top of new survelliance periscope should be 53ft + 9ft = 65ft

I suggest new periscope depth in USNI for survelliance periscope to be 65 ft - 3ft = 62ft (players will change this according to sea state)

Beacause Amethyste class "La Perle" is equiped with Laser finger in Survelliance periscope, I suggest to live attack periscope as it is and
add (create) new survelliance periscope in rear of conning tower as in picture with hight = 21ft

Hope I was clear if not let me know

Regards,

Lau

Postcriptum :

In first picture I posted is in infact a radio antenna. However in attached picture, second submarine from end line you can see the survelliance periscope raised
Миниатюры
Нажмите на изображение для увеличения
Название: tpw79bs5fv.jpg
Просмотров: 747
Размер:	61.1 Кб
ID:	8422  

Последний раз редактировалось Lau; 09-03-2010 в 23:19.
Lau вне форума   Ответить с цитированием
Ответ


Здесь присутствуют: 18 (пользователей: 0 , гостей: 18)
 
Опции темы
Опции просмотра

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход


Часовой пояс GMT +4, время: 01:18.


Red Rodgers official site. Powered by TraFFa. ©2000 - 2024, Red Rodgers
vBulletin Version 3.8.12 by vBS. Copyright ©2000 - 2024, Jelsoft Enterprises Ltd. Перевод: zCarot